Files
cubelinux-kernel/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
T
Greg Kroah-Hartman 598cf27219 Linux 6.19.3
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19 16:33:27 +01:00

46 lines
1.1 KiB
Plaintext

MOXA ART DMA Controller
See dma.txt first
Required properties:
- compatible : Must be "moxa,moxart-dma"
- reg : Should contain registers location and length
- interrupts : Should contain an interrupt-specifier for the sole
interrupt generated by the device
- #dma-cells : Should be 1, a single cell holding a line request number
Example:
dma: dma@90500000 {
compatible = "moxa,moxart-dma";
reg = <0x90500080 0x40>;
interrupts = <24 0>;
#dma-cells = <1>;
};
Clients:
DMA clients connected to the MOXA ART DMA controller must use the format
described in the dma.txt file, using a two-cell specifier for each channel:
a phandle plus one integer cells.
The two cells in order are:
1. A phandle pointing to the DMA controller.
2. Peripheral identifier for the hardware handshaking interface.
Example:
Use specific request line passing from dma
For example, MMC request line is 5
mmc: mmc@98e00000 {
compatible = "moxa,moxart-mmc";
reg = <0x98e00000 0x5C>;
interrupts = <5 0>;
clocks = <&clk_apb>;
dmas = <&dma 5>,
<&dma 5>;
dma-names = "tx", "rx";
};