Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
49 lines
1.5 KiB
Plaintext
49 lines
1.5 KiB
Plaintext
GPIO controller on CE4100 / Sodaville SoCs
|
|
==========================================
|
|
|
|
The bindings for CE4100's GPIO controller match the generic description
|
|
which is covered by the gpio.txt file in this folder.
|
|
|
|
The only additional property is the intel,muxctl property which holds the
|
|
value which is written into the MUXCNTL register.
|
|
|
|
There is no compatible property for now because the driver is probed via
|
|
PCI id (vendor 0x8086 device 0x2e67).
|
|
|
|
The interrupt specifier consists of two cells encoded as follows:
|
|
- <1st cell>: The interrupt-number that identifies the interrupt source.
|
|
- <2nd cell>: The level-sense information, encoded as follows:
|
|
4 - active high level-sensitive
|
|
8 - active low level-sensitive
|
|
|
|
Example of the GPIO device and one user:
|
|
|
|
pcigpio: gpio@b,1 {
|
|
/* two cells for GPIO and interrupt */
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "pci8086,2e67.2",
|
|
"pci8086,2e67",
|
|
"pciclassff0000",
|
|
"pciclassff00";
|
|
|
|
reg = <0x15900 0x0 0x0 0x0 0x0>;
|
|
/* Interrupt line of the gpio device */
|
|
interrupts = <15 1>;
|
|
/* It is an interrupt and GPIO controller itself */
|
|
interrupt-controller;
|
|
gpio-controller;
|
|
intel,muxctl = <0>;
|
|
};
|
|
|
|
testuser@20 {
|
|
compatible = "example,testuser";
|
|
/* User the 11th GPIO line as an active high triggered
|
|
* level interrupt
|
|
*/
|
|
interrupts = <11 8>;
|
|
interrupt-parent = <&pcigpio>;
|
|
/* Use this GPIO also with the gpio functions */
|
|
gpios = <&pcigpio 11 0>;
|
|
};
|