Files
cubelinux-kernel/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
T
Greg Kroah-Hartman 598cf27219 Linux 6.19.3
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19 16:33:27 +01:00

54 lines
1.3 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/amd,sbrmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: >
Sideband Remote Management Interface (SB-RMI) compliant
AMD SoC power device.
maintainers:
- Akshay Gupta <Akshay.Gupta@amd.com>
description: |
SB Remote Management Interface (SB-RMI) is an SMBus compatible
interface that reports AMD SoC's Power (normalized Power) using,
Mailbox Service Request and resembles a typical 8-pin remote power
sensor's I2C interface to BMC. The power attributes in hwmon
reports power in microwatts.
properties:
compatible:
enum:
- amd,sbrmi
reg:
maxItems: 1
description: |
I2C bus address of the device as specified in Section SBI SMBus Address
of the SoC register reference. The SB-RMI address is normally 78h for
socket 0 and 70h for socket 1, but it could vary based on hardware
address select pins.
\[open source SoC register reference\]
https://www.amd.com/en/support/tech-docs?keyword=55898
required:
- compatible
- reg
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
sbrmi@3c {
compatible = "amd,sbrmi";
reg = <0x3c>;
};
};
...