Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
102 lines
2.6 KiB
YAML
102 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/afe/temperature-sense-rtd.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Temperature Sense RTD
|
|
|
|
maintainers:
|
|
- Liam Beguin <liambeguin@gmail.com>
|
|
|
|
description: |
|
|
RTDs (Resistance Temperature Detectors) are a kind of temperature sensors
|
|
used to get a linear voltage to temperature reading within a give range
|
|
(usually 0 to 100 degrees Celsius).
|
|
|
|
When an io-channel measures the output voltage across an RTD such as a
|
|
PT1000, the interesting measurement is almost always the corresponding
|
|
temperature, not the voltage output. This binding describes such a circuit.
|
|
|
|
The general transfer function here is (using SI units)
|
|
|
|
V = R(T) * iexc
|
|
R(T) = r0 * (1 + alpha * T)
|
|
T = 1 / (alpha * r0 * iexc) * (V - r0 * iexc)
|
|
|
|
The following circuit matches what's in the examples section.
|
|
|
|
5V0
|
|
-----
|
|
|
|
|
+---+----+
|
|
| R 5k |
|
|
+---+----+
|
|
|
|
|
V 1mA
|
|
|
|
|
+---- Vout
|
|
|
|
|
+---+----+
|
|
| PT1000 |
|
|
+---+----+
|
|
|
|
|
-----
|
|
GND
|
|
|
|
properties:
|
|
compatible:
|
|
const: temperature-sense-rtd
|
|
|
|
io-channels:
|
|
maxItems: 1
|
|
description: |
|
|
Channel node of a voltage io-channel.
|
|
|
|
'#io-channel-cells':
|
|
const: 0
|
|
|
|
excitation-current-microamp:
|
|
description: The current fed through the RTD sensor.
|
|
|
|
alpha-ppm-per-celsius:
|
|
description: |
|
|
alpha can also be expressed in micro-ohms per ohm Celsius. It's a linear
|
|
approximation of the resistance versus temperature relationship
|
|
between 0 and 100 degrees Celsius.
|
|
|
|
alpha = (R_100 - R_0) / (100 * R_0)
|
|
|
|
Where, R_100 is the resistance of the sensor at 100 degrees Celsius, and
|
|
R_0 (or r-naught-ohms) is the resistance of the sensor at 0 degrees
|
|
Celsius.
|
|
|
|
Pure platinum has an alpha of 3925. Industry standards such as IEC60751
|
|
and ASTM E-1137 specify an alpha of 3850.
|
|
|
|
r-naught-ohms:
|
|
description: |
|
|
Resistance of the sensor at 0 degrees Celsius.
|
|
Common values are 100 for PT100, 500 for PT500, and 1000 for PT1000
|
|
|
|
additionalProperties: false
|
|
required:
|
|
- compatible
|
|
- io-channels
|
|
- excitation-current-microamp
|
|
- alpha-ppm-per-celsius
|
|
- r-naught-ohms
|
|
|
|
examples:
|
|
- |
|
|
pt1000_1: temperature-sensor0 {
|
|
compatible = "temperature-sense-rtd";
|
|
#io-channel-cells = <0>;
|
|
io-channels = <&temp_adc1 0>;
|
|
|
|
excitation-current-microamp = <1000>; /* i = U/R = 5 / 5000 */
|
|
alpha-ppm-per-celsius = <3908>;
|
|
r-naught-ohms = <1000>;
|
|
};
|
|
...
|