Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
26 lines
944 B
Plaintext
26 lines
944 B
Plaintext
* ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
|
|
|
|
Required properties:
|
|
- compatible : Should be "st,spi-fsm"
|
|
- reg : Contains register's location and length.
|
|
- reg-names : Should contain the reg names "spi-fsm"
|
|
- interrupts : The interrupt number
|
|
- pinctrl-0 : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
|
|
|
|
Optional properties:
|
|
- st,syscfg : Phandle to boot-device system configuration registers
|
|
- st,boot-device-reg : Address of the aforementioned boot-device register(s)
|
|
- st,boot-device-spi : Expected boot-device value if booted via this device
|
|
|
|
Example:
|
|
spifsm: spifsm@fe902000{
|
|
compatible = "st,spi-fsm";
|
|
reg = <0xfe902000 0x1000>;
|
|
reg-names = "spi-fsm";
|
|
pinctrl-0 = <&pinctrl_fsm>;
|
|
st,syscfg = <&syscfg_rear>;
|
|
st,boot-device-reg = <0x958>;
|
|
st,boot-device-spi = <0x1a>;
|
|
};
|
|
|