Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
34 lines
1.0 KiB
Plaintext
34 lines
1.0 KiB
Plaintext
*CC2520 IEEE 802.15.4 Compatible Radio*
|
|
|
|
Required properties:
|
|
- compatible: should be "ti,cc2520"
|
|
- spi-max-frequency: maximal bus speed (8000000), should be set to 4000000 depends
|
|
sync or async operation mode
|
|
- reg: the chipselect index
|
|
- pinctrl-0: pin control group to be used for this controller.
|
|
- pinctrl-names: must contain a "default" entry.
|
|
- fifo-gpio: GPIO spec for the FIFO pin
|
|
- fifop-gpio: GPIO spec for the FIFOP pin
|
|
- sfd-gpio: GPIO spec for the SFD pin
|
|
- cca-gpio: GPIO spec for the CCA pin
|
|
- vreg-gpio: GPIO spec for the VREG pin
|
|
- reset-gpio: GPIO spec for the RESET pin
|
|
Optional properties:
|
|
- amplified: include if the CC2520 is connected to a CC2591 amplifier
|
|
|
|
Example:
|
|
cc2520@0 {
|
|
compatible = "ti,cc2520";
|
|
reg = <0>;
|
|
spi-max-frequency = <4000000>;
|
|
amplified;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cc2520_cape_pins>;
|
|
fifo-gpio = <&gpio1 18 0>;
|
|
fifop-gpio = <&gpio1 19 0>;
|
|
sfd-gpio = <&gpio1 13 0>;
|
|
cca-gpio = <&gpio1 16 0>;
|
|
vreg-gpio = <&gpio0 31 0>;
|
|
reset-gpio = <&gpio1 12 0>;
|
|
};
|