Files
cubelinux-kernel/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
T
Greg Kroah-Hartman 598cf27219 Linux 6.19.3
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19 16:33:27 +01:00

56 lines
1.3 KiB
Plaintext

* Pin configuration for TI DA850/OMAP-L138/AM18x
These SoCs have a separate controller for setting bias (internal pullup/down).
Bias can only be selected for groups rather than individual pins.
Required Properties:
- compatible: Must be "ti,da850-pupd"
- reg: Base address and length of the memory resource used by the pullup/down
controller hardware module.
The controller node also acts as a container for pin group configuration nodes.
The names of these groups are ignored.
Pin Group Node Properties:
- groups: An array of strings, each string containing the name of a pin group.
Valid names are "cp0".."cp31".
The pin configuration parameters use the generic pinconf bindings defined in
pinctrl-bindings.txt in this directory. The supported parameters are
bias-disable, bias-pull-up, bias-pull-down.
Example
-------
In common dtsi file:
pinconf: pin-controller@22c00c {
compatible = "ti,da850-pupd";
reg = <0x22c00c 0x8>;
};
In board-specific file:
&pinconf {
pinctrl-0 = <&pinconf_bias_groups>;
pinctrl-names = "default";
pinconf_bias_groups: bias-groups {
pull-up {
groups = "cp30", "cp31";
bias-pull-up;
};
pull-down {
groups = "cp29", "cp28";
bias-pull-down;
};
disable {
groups = "cp27", "cp26";
bias-disable;
};
};
};