Files
cubelinux-kernel/Documentation/devicetree/bindings/sound/img,spdif-in.txt
T
Greg Kroah-Hartman 598cf27219 Linux 6.19.3
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19 16:33:27 +01:00

42 lines
1.0 KiB
Plaintext

Imagination Technologies SPDIF Input Controller
Required Properties:
- compatible : Compatible list, must contain "img,spdif-in"
- #sound-dai-cells : Must be equal to 0
- reg : Offset and length of the register set for the device
- dmas: Contains an entry for each entry in dma-names.
- dma-names: Must include the following entry:
"rx"
- clocks : Contains an entry for each entry in clock-names
- clock-names : Includes the following entries:
"sys" The system clock
Optional Properties:
- resets: Should contain a phandle to the spdif in reset signal, if any
- reset-names: Should contain the reset signal name "rst", if a
reset phandle is given
- interrupts : Contains the spdif in interrupt, if present
Example:
spdif_in: spdif-in@18100e00 {
compatible = "img,spdif-in";
reg = <0x18100E00 0x100>;
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&mdc 15 0xffffffff 0>;
dma-names = "rx";
clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
clock-names = "sys";
#sound-dai-cells = <0>;
};