Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
41 lines
1.3 KiB
Plaintext
41 lines
1.3 KiB
Plaintext
Maxim Integrated MAX98373 Speaker Amplifier
|
|
|
|
This device supports I2C.
|
|
|
|
Required properties:
|
|
|
|
- compatible : "maxim,max98373"
|
|
|
|
- reg : the I2C address of the device.
|
|
|
|
Optional properties:
|
|
|
|
- maxim,vmon-slot-no : slot number used to send voltage information
|
|
or in inteleave mode this will be used as
|
|
interleave slot.
|
|
slot range : 0 ~ 15, Default : 0
|
|
|
|
- maxim,imon-slot-no : slot number used to send current information
|
|
slot range : 0 ~ 15, Default : 0
|
|
|
|
- maxim,spkfb-slot-no : slot number used to send speaker feedback information
|
|
slot range : 0 ~ 15, Default : 0
|
|
|
|
- maxim,interleave-mode : For cases where a single combined channel
|
|
for the I/V sense data is not sufficient, the device can also be configured
|
|
to share a single data output channel on alternating frames.
|
|
In this configuration, the current and voltage data will be frame interleaved
|
|
on a single output channel.
|
|
Boolean, define to enable the interleave mode, Default : false
|
|
|
|
Example:
|
|
|
|
codec: max98373@31 {
|
|
compatible = "maxim,max98373";
|
|
reg = <0x31>;
|
|
maxim,vmon-slot-no = <0>;
|
|
maxim,imon-slot-no = <1>;
|
|
maxim,spkfb-slot-no = <2>;
|
|
maxim,interleave-mode;
|
|
};
|