Files
cubelinux-kernel/Documentation/devicetree/bindings/spi/spi-gpio.yaml
T
Greg Kroah-Hartman 598cf27219 Linux 6.19.3
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19 16:33:27 +01:00

75 lines
1.5 KiB
YAML

# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SPI-GPIO
maintainers:
- Rob Herring <robh@kernel.org>
description:
This represents a group of 3-n GPIO lines used for bit-banged SPI on
dedicated GPIO lines.
allOf:
- $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
const: spi-gpio
sck-gpios:
description: GPIO spec for the SCK line to use
maxItems: 1
miso-gpios:
description: GPIO spec for the MISO line to use
maxItems: 1
mosi-gpios:
description: GPIO spec for the MOSI line to use
maxItems: 1
cs-gpios:
description: GPIOs to use for chipselect lines.
Not needed if num-chipselects = <0>.
minItems: 1
maxItems: 1024
num-chipselects:
description: Number of chipselect lines. Should be <0> if a single device
with no chip select is connected.
$ref: /schemas/types.yaml#/definitions/uint32
# Deprecated properties
gpio-sck: false
gpio-miso: false
gpio-mosi: false
required:
- compatible
- num-chipselects
- sck-gpios
unevaluatedProperties: false
examples:
- |
spi {
compatible = "spi-gpio";
#address-cells = <0x1>;
#size-cells = <0x0>;
sck-gpios = <&gpio 95 0>;
miso-gpios = <&gpio 98 0>;
mosi-gpios = <&gpio 97 0>;
cs-gpios = <&gpio 125 0>;
num-chipselects = <1>;
/* clients */
};
...