Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
42 lines
1.0 KiB
ReStructuredText
42 lines
1.0 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
Kernel driver sa67mcu
|
|
=====================
|
|
|
|
Supported chips:
|
|
|
|
* Kontron sa67mcu
|
|
|
|
Prefix: 'sa67mcu'
|
|
|
|
Datasheet: not available
|
|
|
|
Authors: Michael Walle <mwalle@kernel.org>
|
|
|
|
Description
|
|
-----------
|
|
|
|
The sa67mcu is a board management controller which also exposes a hardware
|
|
monitoring controller.
|
|
|
|
The controller has two voltage and one temperature sensor. The values are
|
|
hold in two 8 bit registers to form one 16 bit value. Reading the lower byte
|
|
will also capture the high byte to make the access atomic. The unit of the
|
|
volatge sensors are 1mV and the unit of the temperature sensor is 0.1degC.
|
|
|
|
Sysfs entries
|
|
-------------
|
|
|
|
The following attributes are supported.
|
|
|
|
======================= ========================================================
|
|
in0_label "VDDIN"
|
|
in0_input Measured VDDIN voltage.
|
|
|
|
in1_label "VDD_RTC"
|
|
in1_input Measured VDD_RTC voltage.
|
|
|
|
temp1_input MCU temperature. Roughly the board temperature.
|
|
======================= ========================================================
|
|
|