cubelinux/cubelinux-kernel
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
3ee59dafff790aed55b6d3dbca2d9503fbeb06a1
cubelinux-kernel/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
T
Greg Kroah-Hartman 598cf27219 Linux 6.19.3 
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19 16:33:27 +01:00

980 lines
22 KiB
Devicetree
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2025 Rockchip Electronics Co., Ltd.
*
*/
/dts-v1/;
#include <dt-bindings/clock/rockchip,rk3588-cru.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3588.dtsi"
/ {
model = "Rockchip RK3588 EVB2 V10 Board";
compatible = "rockchip,rk3588-evb2-v10", "rockchip,rk3588";
aliases {
mmc0 = &sdhci;
serial2 = &uart2;
};
chosen {
stdout-path = "serial2:1500000n8";
};
dp-con {
compatible = "dp-connector";
label = "DP OUT";
type = "full-size";
port {
dp_con_in: endpoint {
remote-endpoint = <&dp0_out_con>;
};
};
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi0_out_con>;
};
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&hym8563>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
/*
* On the module itself this is one of these (depending
* on the actual card populated):
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
post-power-on-delay-ms = <200>;
reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
};
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc5v0_host: vcc5v0-host {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
vin-supply = <&vcc5v0_usb>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
};
vcc5v0_usb: regulator-vcc5v0-usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usbdcin>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_usbdcin: regulator-vcc5v0-usbdcin {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usbdcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
};
&dp0 {
pinctrl-0 = <&dp0m0_pins>;
pinctrl-names = "default";
status = "okay";
};
&dp0_in {
dp0_in_vp2: endpoint {
remote-endpoint = <&vp2_out_dp0>;
};
};
&dp0_out {
dp0_out_con: endpoint {
remote-endpoint = <&dp_con_in>;
};
};
&gpu {
mali-supply = <&vdd_gpu_s0>;
sram-supply = <&vdd_gpu_mem_s0>;
status = "okay";
};
&hdmi0 {
status = "okay";
};
&hdmi0_in {
hdmi0_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi0>;
};
};
&hdmi0_out {
hdmi0_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdptxphy0 {
status = "okay";
};
&i2c2 {
status = "okay";
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-output-names = "hym8563";
interrupt-parent = <&gpio0>;
interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
&pd_gpu {
domain-supply = <&vdd_gpu_s0>;
};
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wifi {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
};
wifi_host_wake_irq: wifi-host-wake-irq {
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
no-sd;
no-sdio;
status = "okay";
};
&sdio {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&sdiom0_pins>;
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
disable-wp;
keep-power-in-suspend;
max-frequency = <150000000>;
mmc-pwrseq = <&sdio_pwrseq>;
no-mmc;
non-removable;
no-sd;
sd-uhs-sdr104;
status = "okay";
brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio2>;
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-0 = <&wifi_host_wake_irq>;
pinctrl-names = "default";
};
};
&spi2 {
status = "okay";
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
num-cs = <2>;
pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
#gpio-cells = <2>;
gpio-controller;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
pinctrl-names = "default";
spi-max-frequency = <1000000>;
system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc5v0_sys>;
vcc13-supply = <&vcc5v0_sys>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc5v0_sys>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl1";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: dcdc-reg1 {
/* regulator coupling requires always-on */
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_gpu_s0";
regulator-enable-ramp-delay = <400>;
regulator-coupled-with = <&vdd_gpu_mem_s0>;
regulator-coupled-max-spread = <10000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_npu_s0: dcdc-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_npu_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_log_s0: dcdc-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_log_s0";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: dcdc-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_vdenc_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu_mem_s0: dcdc-reg5 {
/* regulator coupling requires always-on */
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <400>;
regulator-name = "vdd_gpu_mem_s0";
regulator-coupled-with = <&vdd_gpu_s0>;
regulator-coupled-max-spread = <10000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_npu_mem_s0: dcdc-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_npu_mem_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_2v0_pldo_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vdd_vdenc_mem_s0: dcdc-reg8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_vdenc_mem_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd2_ddr_s3: dcdc-reg9 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vdd2_ddr_s3";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_1v1_nldo_s3: dcdc-reg10 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-ramp-delay = <12500>;
regulator-name = "vcc_1v1_nldo_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1100000>;
};
};
avcc_1v8_s0: pldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <12500>;
regulator-name = "avcc_1v8_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd1_1v8_ddr_s3: pldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd1_1v8_ddr_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avcc_1v8_codec_s0: pldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <12500>;
regulator-name = "avcc_1v8_codec_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3_s3: pldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-name = "vcc_3v3_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-name = "vccio_sd_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_1v8_s3: pldo-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <12500>;
regulator-name = "vccio_1v8_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_0v75_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd2l_0v9_ddr_s3: nldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdd2l_0v9_ddr_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vdd_0v75_hdmi_edp_s0: nldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "vdd_0v75_hdmi_edp_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
avdd_0v75_s0: nldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "avdd_0v75_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v85_s0: nldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-name = "vdd_0v85_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
pmic@1 {
compatible = "rockchip,rk806";
reg = <0x01>;
#gpio-cells = <2>;
gpio-controller;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>,
<&rk806_slave_dvs3_null>;
pinctrl-names = "default";
spi-max-frequency = <1000000>;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc5v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_2v0_pldo_s3>;
vcca-supply = <&vcc5v0_sys>;
rk806_slave_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl1";
function = "pin_fun0";
};
rk806_slave_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_slave_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_cpu_big1_s0: dcdc-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-coupled-with = <&vdd_cpu_big1_mem_s0>;
regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_cpu_big1_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big0_s0: dcdc-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-coupled-with = <&vdd_cpu_big0_mem_s0>;
regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_cpu_big0_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: dcdc-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-coupled-with = <&vdd_cpu_lit_mem_s0>;
regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_cpu_lit_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3_s0: dcdc-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-name = "vcc_3v3_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big1_mem_s0: dcdc-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-coupled-with = <&vdd_cpu_big1_s0>;
regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_cpu_big1_mem_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big0_mem_s0: dcdc-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-coupled-with = <&vdd_cpu_big0_s0>;
regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_cpu_big0_mem_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s0: dcdc-reg7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <12500>;
regulator-name = "vcc_1v8_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_mem_s0: dcdc-reg8 {
regulator-always-on;
regulator-boot-on;
regulator-coupled-with = <&vdd_cpu_lit_s0>;
regulator-coupled-max-spread = <10000>;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_cpu_lit_mem_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vddq_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg10 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_cam_s0: pldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <12500>;
regulator-name = "vcc_1v8_cam_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
avdd1v8_ddr_pll_s0: pldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <12500>;
regulator-name = "avdd1v8_ddr_pll_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_1v8_pll_s0: pldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_1v8_pll_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3_sd_s0: pldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-name = "vcc_3v3_sd_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_2v8_cam_s0: pldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-ramp-delay = <12500>;
regulator-name = "vcc_2v8_cam_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
pldo6_s3: pldo-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "pldo6_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_pll_s0: nldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_0v75_pll_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_pll_s0: nldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-name = "vdd_ddr_pll_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
avdd_0v85_s0: nldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-ramp-delay = <12500>;
regulator-name = "avdd_0v85_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
avdd_1v2_cam_s0: nldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-ramp-delay = <12500>;
regulator-name = "avdd_1v2_cam_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
avdd_1v2_s0: nldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-ramp-delay = <12500>;
regulator-name = "avdd_1v2_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&u2phy0 {
status = "okay";
};
&u2phy0_otg {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&u2phy1 {
status = "okay";
};
&u2phy1_otg {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy2_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy3_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
&usbdp_phy0 {
rockchip,dp-lane-mux = <2 3>;
status = "okay";
};
&usbdp_phy1 {
rockchip,dp-lane-mux = <2 3>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host1_xhci {
dr_mode = "host";
status = "okay";
};
&vop {
/*
* If no dedicated PLL was specified, the GPLL would be automatically
* assigned as the PLL source for dclk_vop2. As the frequency of GPLL
* is 1188 MHz, we can only get typical clock frequencies such as
* 74.25MHz, 148.5MHz, 297MHz, 594MHz.
*
* So here we set the parent clock of VP2 to V0PLL so that we can get
* any frequency.
*/
assigned-clocks = <&cru DCLK_VOP2_SRC>;
assigned-clock-parents = <&cru PLL_V0PLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi0_in_vp0>;
};
};
&vp2 {
vp2_out_dp0: endpoint@a {
reg = <ROCKCHIP_VOP2_EP_DP0>;
remote-endpoint = <&dp0_in_vp2>;
};
};
Reference in New Issue View Git Blame Copy Permalink