cubelinux-kernel/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3588-orangepi-5.dtsi"

/ {
	vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		/* USB_OTG_PWREN */
		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&usb_otg_pwren>;
		regulator-name = "vcc5v0_usb30_otg";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc5v0_sys>;
	};
};

&headphone_amp {
	/* PHONE_CTL */
	enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
};

&analog_sound {
	pinctrl-names = "default";
	pinctrl-0 = <&hp_detect>;
	simple-audio-card,aux-devs = <&headphone_amp>;
	simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;

	simple-audio-card,routing =
		"Headphones", "LOUT1",
		"Headphones", "ROUT1",
		"LINPUT1", "Microphone Jack",
		"RINPUT1", "Microphone Jack",
		"LINPUT2", "Onboard Microphone",
		"RINPUT2", "Onboard Microphone";
	simple-audio-card,widgets =
		"Microphone", "Microphone Jack",
		"Microphone", "Onboard Microphone",
		"Headphone", "Headphones";
};

&fan {
	/* FAN_CTL_H */
	pwms = <&pwm9 0 50000 0>;
};

&hym8563 {
	interrupt-parent = <&gpio0>;
	interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
	pinctrl-names = "default";
	pinctrl-0 = <&rtc_int_l>;
};

&led_blue_pwm {
	/* PWM_LED1 */
	status = "okay";
};

/* phy2 */
&pcie2x1l1 {
	reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie_eth>;
	status = "okay";
};

&pinctrl {
	hym8563 {
		rtc_int_l: hym8563-int {
			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	sound {
		hp_detect: hp-detect {
			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		usb_host_pwren: usb-host-pwren {
			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	wireless-bluetooth {
		bt_reg_on: bt-reg-on {
			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		bt_wake_host: bt-wake-host {
			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		host_wake_bt: host-wake-bt {
			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&pwm4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm4m0_pins>;
	status = "okay";
};

&pwm5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm5m1_pins>;
	status = "okay";
};

&pwm9 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm9m2_pins>;
	status = "okay";
};

&sfc {
	pinctrl-names = "default";
	pinctrl-0 = <&fspim2_pins>;
};

&u2phy0_otg {
	phy-supply = <&vcc5v0_usb30_otg>;
};

&u2phy1_otg {
	phy-supply = <&vcc5v0_usb20>;
};

&uart7 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart7m0_xfer &uart7m0_ctsn &uart7m0_rtsn>;
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "brcm,bcm43438-bt";
		clocks = <&hym8563>;
		clock-names = "lpo";
		device-wakeup-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>;
		interrupt-names = "host-wakeup";
		pinctrl-names = "default";
		pinctrl-0 = <&bt_reg_on>, <&host_wake_bt>, <&bt_wake_host>;
		shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
		vbat-supply = <&vcc_3v3_s3>;
		vddio-supply = <&vcc_1v8_s3>;
	};
};

&usb_host0_xhci {
	dr_mode = "host";
};

/* pcie eth. not a real regulator. 33VAUX */
&vcc3v3_pcie_eth {
	/* Ethernet_power_en */
	gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
};

/*
 * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic,
 * both regulators share the same enable gpio
 */
&vcc5v0_usb20 {
	/* USB_HOST_PWREN */
	gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&usb_host_pwren>;
};