Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
362 lines
8.2 KiB
Devicetree
362 lines
8.2 KiB
Devicetree
// SPDX-License-Identifier: GPL-2.0-only or MIT
|
|
/*
|
|
* Device Tree file for the AM62L3 Evaluation Module
|
|
* Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
|
|
*
|
|
* Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4
|
|
* Data Sheet: https://www.ti.com/lit/pdf/sprspa1
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
#include "k3-am62l3.dtsi"
|
|
#include "k3-pinctrl.h"
|
|
|
|
/ {
|
|
compatible = "ti,am62l3-evm", "ti,am62l3";
|
|
model = "Texas Instruments AM62L3 Evaluation Module";
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory@80000000 {
|
|
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
|
|
device_type = "memory";
|
|
bootph-all;
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usr_button_pins_default>;
|
|
|
|
usr: button-usr {
|
|
label = "User Key";
|
|
linux,code = <BTN_0>;
|
|
gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usr_led_pins_default>;
|
|
|
|
led-0 {
|
|
label = "am62-sk:green:heartbeat";
|
|
gpios = <&gpio0 123 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
function = LED_FUNCTION_HEARTBEAT;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
wkup0-thermal {
|
|
polling-delay-passive = <250>; /* milliSeconds */
|
|
polling-delay = <500>; /* milliSeconds */
|
|
thermal-sensors = <&vtm0 0>;
|
|
|
|
trips {
|
|
crit0 {
|
|
temperature = <125000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vmain_pd: regulator-0 {
|
|
/* TPS65988 PD CONTROLLER OUTPUT */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmain_pd";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
bootph-all;
|
|
};
|
|
|
|
vcc_3v3_sys: regulator-1 {
|
|
/* output of LM61460-Q1 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_sys";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vmain_pd>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_mmc1: regulator-2 {
|
|
/* TPS22918DBVR */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_mmc1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
vin-supply = <&vcc_3v3_sys>;
|
|
gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
|
|
bootph-all;
|
|
};
|
|
|
|
vcc_1v8: regulator-3 {
|
|
/* output of TPS6282518DMQ */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_3v3_sys>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&gpio0 {
|
|
bootph-all;
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins_default>;
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
eeprom@51 {
|
|
/* AT24C512C-MAHM-T or M24512-DFMC6TG */
|
|
compatible = "atmel,24c512";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins_default>;
|
|
clock-frequency = <100000>;
|
|
status = "okay";
|
|
|
|
exp1: gpio@22 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names = "", "",
|
|
"UART1_FET_SEL", "MMC1_SD_EN",
|
|
"VPP_LDO_EN", "EXP_PS_3V3_EN",
|
|
"UART1_FET_BUF_EN", "", "",
|
|
"", "DSI_GPIO0", "DSI_GPIO1",
|
|
"", "BT_UART_WAKE_SOC_3V3",
|
|
"USB_TYPEA_OC_INDICATION", "",
|
|
"", "WLAN_ALERTn", "", "",
|
|
"HDMI_INTn", "TEST_GPIO2",
|
|
"MCASP0_FET_EN", "MCASP0_BUF_BT_EN",
|
|
"MCASP0_FET_SEL", "DSI_EDID",
|
|
"PD_I2C_IRQ", "IO_EXP_TEST_LED";
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <91 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio0_ioexp_intr_pins_default>;
|
|
bootph-all;
|
|
};
|
|
|
|
exp2: gpio@23 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x23>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names = "BT_EN_SOC", "VOUT0_FET_SEL0",
|
|
"", "",
|
|
"", "",
|
|
"", "",
|
|
"WL_LT_EN", "EXP_PS_5V0_EN",
|
|
"TP45", "TP48",
|
|
"TP46", "TP49",
|
|
"TP47", "TP50",
|
|
"GPIO_QSPI_NAND_RSTn", "GPIO_HDMI_RSTn",
|
|
"GPIO_CPSW1_RST", "GPIO_CPSW2_RST",
|
|
"", "GPIO_AUD_RSTn",
|
|
"GPIO_eMMC_RSTn", "SoC_WLAN_SDIO_RST";
|
|
bootph-all;
|
|
};
|
|
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins_default>;
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
typec_pd0: tps658x@3f {
|
|
compatible = "ti,tps6598x";
|
|
reg = <0x3f>;
|
|
|
|
connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
self-powered;
|
|
data-role = "dual";
|
|
power-role = "sink";
|
|
|
|
port {
|
|
usb_con_hs: endpoint {
|
|
remote-endpoint = <&usb0_hs_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmx0 {
|
|
gpio0_ioexp_intr_pins_default: gpio0-ioexp-intr-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x01b0, PIN_INPUT, 7) /* (B12) SPI0_D1.GPIO0_91 */
|
|
>;
|
|
bootph-all;
|
|
};
|
|
|
|
i2c0_pins_default: i2c0-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x01cc, PIN_INPUT_PULLUP, 0) /* (B7) I2C0_SCL */
|
|
AM62LX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 0) /* (A7) I2C0_SDA */
|
|
>;
|
|
bootph-all;
|
|
};
|
|
|
|
i2c1_pins_default: i2c1-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 0) /* (D7) I2C1_SCL */
|
|
AM62LX_IOPAD(0x01d8, PIN_INPUT_PULLUP, 0) /* (A6) I2C1_SDA */
|
|
>;
|
|
bootph-all;
|
|
};
|
|
|
|
i2c2_pins_default: i2c2-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x01dc, PIN_INPUT_PULLUP, 0) /* (B8) I2C2_SCL */
|
|
AM62LX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D8) I2C2_SDA */
|
|
>;
|
|
};
|
|
|
|
mmc0_pins_default: mmc0-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (D2) MMC0_CMD */
|
|
AM62LX_IOPAD(0x020c, PIN_OUTPUT, 0) /* (B2) MMC0_CLK */
|
|
AM62LX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (D3) MMC0_DAT0 */
|
|
AM62LX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (D4) MMC0_DAT1 */
|
|
AM62LX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (C1) MMC0_DAT2 */
|
|
AM62LX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (C2) MMC0_DAT3 */
|
|
AM62LX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (C4) MMC0_DAT4 */
|
|
AM62LX_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B3) MMC0_DAT5 */
|
|
AM62LX_IOPAD(0x01f0, PIN_INPUT_PULLUP, 0) /* (A3) MMC0_DAT6 */
|
|
AM62LX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B4) MMC0_DAT7 */
|
|
>;
|
|
bootph-all;
|
|
};
|
|
|
|
mmc1_pins_default: mmc1-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x0230, PIN_INPUT, 0) /* (Y3) MMC1_CMD */
|
|
AM62LX_IOPAD(0x0228, PIN_OUTPUT, 0) /* (Y2) MMC1_CLK */
|
|
AM62LX_IOPAD(0x0224, PIN_INPUT, 0) /* (AA1) MMC1_DAT0 */
|
|
AM62LX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y4) MMC1_DAT1 */
|
|
AM62LX_IOPAD(0x021c, PIN_INPUT_PULLUP, 0) /* (AA2) MMC1_DAT2 */
|
|
AM62LX_IOPAD(0x0218, PIN_INPUT_PULLUP, 0) /* (AB2) MMC1_DAT3 */
|
|
AM62LX_IOPAD(0x0234, PIN_INPUT, 0) /* (B6) MMC1_SDCD */
|
|
>;
|
|
bootph-all;
|
|
};
|
|
|
|
uart0_pins_default: uart0-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x01b4, PIN_INPUT, 0) /* (D13) UART0_RXD */
|
|
AM62LX_IOPAD(0x01b8, PIN_OUTPUT, 0) /* (C13) UART0_TXD */
|
|
>;
|
|
bootph-all;
|
|
};
|
|
|
|
usb1_default_pins: usb1-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x0248, PIN_INPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (A5) USB1_DRVVBUS */
|
|
>;
|
|
};
|
|
|
|
usr_button_pins_default: usr-button-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x01ac, PIN_INPUT, 7) /* (E12) SPI0_D0.GPIO0_90 */
|
|
>;
|
|
};
|
|
|
|
usr_led_pins_default: usr-led-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62LX_IOPAD(0x0238, PIN_OUTPUT, 7) /* (D24) MMC1_SDWP.GPIO0_123 */
|
|
>;
|
|
};
|
|
|
|
};
|
|
|
|
&sdhci0 {
|
|
/* eMMC */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
non-removable;
|
|
status = "okay";
|
|
bootph-all;
|
|
};
|
|
|
|
&sdhci1 {
|
|
/* SD/MMC */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
vmmc-supply = <&vdd_mmc1>;
|
|
disable-wp;
|
|
status = "okay";
|
|
bootph-all;
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-0 = <&uart0_pins_default>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
bootph-all;
|
|
};
|
|
|
|
&usbss0 {
|
|
status = "okay";
|
|
ti,vbus-divider;
|
|
};
|
|
|
|
&usb0 {
|
|
usb-role-switch;
|
|
|
|
port {
|
|
usb0_hs_ep: endpoint {
|
|
remote-endpoint = <&usb_con_hs>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbss1 {
|
|
status = "okay";
|
|
ti,vbus-divider;
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "host";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb1_default_pins>;
|
|
};
|