Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
28 lines
838 B
Plaintext
28 lines
838 B
Plaintext
* NXP PCA PCA9564/PCA9665 I2C controller
|
|
|
|
The PCA9564/PCA9665 serves as an interface between most standard
|
|
parallel-bus microcontrollers/microprocessors and the serial I2C-bus
|
|
and allows the parallel bus system to communicate bi-directionally
|
|
with the I2C-bus.
|
|
|
|
Required properties :
|
|
|
|
- reg : Offset and length of the register set for the device
|
|
- compatible : one of "nxp,pca9564" or "nxp,pca9665"
|
|
|
|
Optional properties
|
|
- interrupts : the interrupt number
|
|
- reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line
|
|
is active low, it should be marked GPIO_ACTIVE_LOW.
|
|
- clock-frequency : I2C bus frequency.
|
|
|
|
Example:
|
|
i2c0: i2c@80000 {
|
|
compatible = "nxp,pca9564";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x80000 0x4>;
|
|
reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
|
clock-frequency = <100000>;
|
|
};
|