Files
cubelinux-kernel/Documentation/devicetree/bindings/clock/ti,cdce706.txt
T
Greg Kroah-Hartman 598cf27219 Linux 6.19.3
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19 16:33:27 +01:00

43 lines
1.1 KiB
Plaintext

Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
synthesizer/multiplier/divider.
Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
I2C device node required properties:
- compatible: shall be "ti,cdce706".
- reg: i2c device address, shall be in range [0x68...0x6b].
- #clock-cells: from common clock binding; shall be set to 1.
- clocks: from common clock binding; list of parent clock
handles, shall be reference clock(s) connected to CLK_IN0
and CLK_IN1 pins.
- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
in case of crystal oscillator or differential signal input
configuration. Use clk_in0 and clk_in1 in case of independent
single-ended LVCMOS inputs configuration.
Example:
clocks {
clk54: clk54 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <54000000>;
};
};
...
i2c0: i2c-master@d090000 {
...
cdce706: clock-synth@69 {
compatible = "ti,cdce706";
#clock-cells = <1>;
reg = <0x69>;
clocks = <&clk54>;
clock-names = "clk_in0";
};
};
...
simple-audio-card,codec {
...
clocks = <&cdce706 4>;
};