Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
37 lines
980 B
Plaintext
37 lines
980 B
Plaintext
PXA LCD Controller
|
|
------------------
|
|
|
|
Required properties:
|
|
- compatible : one of these
|
|
"marvell,pxa2xx-lcdc",
|
|
"marvell,pxa270-lcdc",
|
|
"marvell,pxa300-lcdc"
|
|
- reg : should contain 1 register range (address and length).
|
|
- interrupts : framebuffer controller interrupt.
|
|
- clocks: phandle to input clocks
|
|
|
|
Optional properties:
|
|
- lcd-supply: A phandle to a power regulator that controls the LCD voltage.
|
|
|
|
Required nodes:
|
|
- port: connection to the LCD panel (see video-interfaces.txt)
|
|
This node must have its properties bus-width and remote-endpoint set.
|
|
If the panel is not a TFT color panel, then a "lcd-type" property in
|
|
the panel should specify the panel type.
|
|
This panel node should be in the board dts.
|
|
|
|
Example:
|
|
lcd-controller@40500000 {
|
|
compatible = "marvell,pxa2xx-lcdc";
|
|
reg = <0x44000000 0x10000>;
|
|
interrupts = <17>;
|
|
clocks = <&clks CLK_LCD>;
|
|
|
|
port {
|
|
lcdc_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
bus-width = <16>;
|
|
};
|
|
};
|
|
};
|