Files
cubelinux-kernel/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
T
Greg Kroah-Hartman 598cf27219 Linux 6.19.3
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19 16:33:27 +01:00

56 lines
1.3 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7921s-bluetooth.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek MT7921S Bluetooth
maintainers:
- Sean Wang <sean.wang@mediatek.com>
description:
MT7921S is an SDIO-attached dual-radio WiFi+Bluetooth Combo chip; each
function is its own SDIO function on a shared SDIO interface. The chip
has two dedicated reset lines, one for each function core.
This binding only covers the Bluetooth SDIO function, with one device
node describing only this SDIO function.
allOf:
- $ref: bluetooth-controller.yaml#
properties:
compatible:
enum:
- mediatek,mt7921s-bluetooth
reg:
const: 2
reset-gpios:
maxItems: 1
description:
An active-low reset line for the Bluetooth core; on typical M.2
key E modules this is the W_DISABLE2# pin.
required:
- compatible
- reg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
mmc {
#address-cells = <1>;
#size-cells = <0>;
bluetooth@2 {
compatible = "mediatek,mt7921s-bluetooth";
reg = <2>;
reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
};
};