Greg Kroah-Hartman
598cf27219
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
29 lines
933 B
Plaintext
29 lines
933 B
Plaintext
* CA8210 IEEE 802.15.4 *
|
|
|
|
Required properties:
|
|
- compatible: Should be "cascoda,ca8210"
|
|
- reg: Controlling chip select
|
|
- spi-max-frequency: Maximum clock speed, should be *less than*
|
|
4000000
|
|
- spi-cpol: Requires inverted clock polarity
|
|
- reset-gpio: GPIO attached to reset
|
|
- irq-gpio: GPIO attached to IRQ
|
|
Optional properties:
|
|
- extclock-enable: Include for the ca8210 to route its 16MHz clock
|
|
to an output
|
|
- extclock-freq: Frequency in Hz of the external clock
|
|
- extclock-gpio: GPIO of the ca8210 to output the clock on
|
|
|
|
Example:
|
|
ca8210@0 {
|
|
compatible = "cascoda,ca8210";
|
|
reg = <0>;
|
|
spi-max-frequency = <3000000>;
|
|
spi-cpol;
|
|
reset-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
|
|
irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
|
extclock-enable;
|
|
extclock-freq = 16000000;
|
|
extclock-gpio = 2;
|
|
};
|