Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Luna Jernberg <droidbittin@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
44 lines
1.4 KiB
Plaintext
44 lines
1.4 KiB
Plaintext
STMicroelectronics PWM driver bindings
|
|
--------------------------------------
|
|
|
|
Required parameters:
|
|
- compatible : "st,pwm"
|
|
- #pwm-cells : Number of cells used to specify a PWM. First cell
|
|
specifies the per-chip index of the PWM to use and the
|
|
second cell is the period in nanoseconds - fixed to 2
|
|
for STiH41x.
|
|
- reg : Physical base address and length of the controller's
|
|
registers.
|
|
- pinctrl-names: Set to "default".
|
|
- pinctrl-0: List of phandles pointing to pin configuration nodes
|
|
for PWM module.
|
|
For Pinctrl properties, please refer to [1].
|
|
- clock-names: Valid entries are "pwm" and/or "capture".
|
|
- clocks: phandle of the clock used by the PWM module.
|
|
For Clk properties, please refer to [2].
|
|
- interrupts: IRQ for the Capture device
|
|
|
|
Optional properties:
|
|
- st,pwm-num-chan: Number of available PWM channels. Default is 0.
|
|
- st,capture-num-chan: Number of available Capture channels. Default is 0.
|
|
|
|
[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
|
[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Example:
|
|
|
|
pwm1: pwm@fe510000 {
|
|
compatible = "st,pwm";
|
|
reg = <0xfe510000 0x68>;
|
|
#pwm-cells = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1_chan0_default
|
|
&pinctrl_pwm1_chan1_default
|
|
&pinctrl_pwm1_chan2_default
|
|
&pinctrl_pwm1_chan3_default>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "pwm";
|
|
st,pwm-num-chan = <4>;
|
|
st,capture-num-chan = <2>;
|
|
};
|