Files
cubelinux-kernel/Documentation/hwmon/sl28cpld.rst
T
Greg Kroah-Hartman 598cf27219 Linux 6.19.3
Link: https://lore.kernel.org/r/20260217200002.683975158@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-19 16:33:27 +01:00

37 lines
1.0 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0-only
Kernel driver sl28cpld
======================
Supported chips:
* Kontron sl28cpld
Prefix: 'sl28cpld'
Datasheet: not available
Authors: Michael Walle <michael@walle.cc>
Description
-----------
The sl28cpld is a board management controller which also exposes a hardware
monitoring controller. At the moment this controller supports a single fan
supervisor. In the future there might be other flavours and additional
hardware monitoring might be supported.
The fan supervisor has a 7 bit counter register and a counter period of 1
second. If the 7 bit counter overflows, the supervisor will automatically
switch to x8 mode to support a wider input range at the loss of
granularity.
Sysfs entries
-------------
The following attributes are supported.
======================= ========================================================
fan1_input Fan RPM. Assuming 2 pulses per revolution.
======================= ========================================================